BZC-350B truck mounted drilling rig is a rotary drilling rig with directional circulation, which is equipped with BW900/25 mud pump, It adopts the slurry as the washing fluid, it can drill on clay, sand and rock if it is equipped with a good drilling bit.it can drill up to 300 metre and the drilling diameter is 5 metre.
BZC-350B truck mounted drilling rig is a rotary drilling rig with directional circulation, which is equipped with BW900/25 mud pump, it can drill up to 300 metres and he diameter is 5 metres.
Max. drilling diameter, mm - 1500
Max drilling depth, m - 55
Car weight in a working configuration, kg - 50000
Effort of pressing, kN - 113
Coming out effort, kN - 154
The maximum draught (on 1 layer)of the basic capstan engine, kN- 150
The maximum draught (on 1 layer)of the auxiliary capstan engine, kN -64
Engine power, (kVt)- 250 (187) in 1800
Max pressure on coat, mPa - 0.3
Location - Russia
YEAR - 2007
Operating time - 1415 m/h
Drilling rig SOLMEC SR-40 Max. drilling diameter, mm - 1500 Max drilling depth,
Drilling rig SOLMEC SR-40 Max. drilling diameter, mm - 1500 Max drilling depth,
Item No.
1489
Capacity
50000
Status
Used
Location
Rostov-on-Don
Build Year
2007
Item Details
Drilling rig SOLMEC SR-40
Max. drilling diameter, mm - 1500
Max drilling depth, m - 55
Car weight in a working configuration, kg - 50000
Effort of pressing, kN - 113
Coming out effort, kN - 154
The maximum draught (on 1 layer)of the basic capstan engine, kN- 150
The maximum draught (on 1 layer)of the auxiliary capstan engine, kN -64
Engine power, (kVt)- 250 (187) in 1800
Max pressure on coat, mPa - 0.3
Location - Russia
YEAR - 2007
Operating time - 1415 m/h
Max. drilling diameter, mm - 1500 Max drilling depth, m - 55 Car weight in a wor
Max. drilling diameter, mm - 1500 Max drilling depth, m - 55 Car weight in a wor
Item No.
1488
Status
Used
Location
Rostov-on-Don
Build Year
2007
Item Details
Drilling rig SOLMEC SR-40
Max. drilling diameter, mm - 1500
Max drilling depth, m - 55
Car weight in a working configuration, kg - 50000
Effort of pressing, kN - 113
Coming out effort, kN - 154
The maximum draught (on 1 layer)of the basic capstan engine, kN- 150
The maximum draught (on 1 layer)of the auxiliary capstan engine, kN -64
Engine power, (kVt)- 250 (187) in 1800
Max pressure on coat, mPa - 0.3
Location - Russia
YEAR - 2007
Operating time - 1415 m/h
The rig was originally built by LS National Oil well in 2002 and was fully refurbished by Walkyria in 2008 at a
expense of more than $5,000,000
• Drilling rig package:
– The mast is an LS National Oil well model JJ315/9K cantilever type manufactured in 2002 designed to support
an operational maximum weight-on-hook of 350 tons with a height of 54.5 m and rated for a depth of 6,000 m
– Draw-works is 1500hp capacity with a spare set on site
– Rotary table is a a 37½ inch type rated for 650 tons
– Top drive is a hydraulic Aker refurbished by HP in 2008
– Powered with three 810kW Jinan diesel engines running LS National Oil well generators. The emergency
generators are composed of two Volvo Diesel engines and generators.
125 National / Ideal 2000hp and 80 National / Ideal 1000hp
Include new:
-Rig Structures
-Generator Sets / Buildings
-Hoisting Gear
-Rotary Systems
-Mud circulation Systems
-Handling Tools
-BOP Systems
-Fuel and Water Systems
Used Brands:
USA Tools, Ingersoll, MCM O'Drill, Union, National, Ideal, JT/Four international, Caterpillar, Pyramid
Truck-mounted drilling rig and Skid-mounted drilling rig
Item No.
994
Status
New
Location
Asia
Build Year
0
Item Details
Brief Introduction for truck-mounted drilling rig:
1. Integral rotation type adopts hydraulic and machinery driving, realizes the flexibility stepless varying speed for the workover device and substructure model of carrier; Caterpillar motor matched with Allision transmission is reasonable ,safe ,high efficiency, steady and increases the power ratio of motor.
2. Drilling and workover equipments are equipped on the carrier increases the movability of equipment, shortens the installation readiness time of rigs and raises the efficiency of drilling.
3. Integral hydraulic air driving operation system and double crown block saver have worker¡¯s intensity labor relieved and raise the operation safety.
4. Adopting integral forging brake drum ,force internal recycle cooling, raise the braking safety and service life and is favor of protecting the environment
5. Air and flameout protection device and galloping protection device satisfy the special requirements in oil and gas well.
6. Driving self-propelled floor with 14X 8 of load capacity adopts power steering system so that the rig has good trafficability characteristic and cross-country ability.
7. The transmission box of rotary table can realize forward gear and reverse gear ,adopts kinds of drilling rod button of circling operation. Reactive torque release device guarantees that during the drilling course drilling rod deformation will be able to release safely.
8. The mobile carrier rigs are designed and manufactured in accordance with API and HSE standard and meet the international bid requirements
Please see attached photos, the equipment is in very good condition steel and mechanicaly, what you see is purely cosmetics that are needed. The Elmago was removed and serviced and is ready for refitting. 5 sections out of 8 on the mast are new and unused, this not due to any damage done to mast, the sections were lost overboard sailing around Cape when rig was being delivered.
